Log in to join the conversation.
Roll Player + 2 expansions - Orig Box - Sleeved
Print Profile (2) 0.2mm layer, 3 walls, 30% infill 3h 21m 130 g PLA
Plate Details (3)
Plate Details (7)
This is a low-filament fast printing game organizer for Roll Player. Note that unlike some of the others available, this is intended to fit inside the original box (see last pic, the lid is a little raised once closed). Holds Roll Player + Monsters & Minions + Fiends & Familiars with penny-sleeved cards though there's some space so you could probably use nicer sleeves if you wanted.
In trying to save filament/time/box space, and since I find it really wasteful to print large sheets of flat plastic, most of the parts that hold cards are designed to be printed as a framework for holding things in place in the box only and is therefore not necessarily stable enough to be taken out of the box and placed on the table except for the token trays which can be taken out and placed on the table.
The last note is that for everything to fit, the dice need to be taken out of the bag and arranged in the big tray. Its actually not that onerous to do but otherwise the mishapen cloth bag is not likely to fit.
Let me know if you have any questions or suggestions.
Print comments
1 of 1 maker says it printed well
Printed on an X2D with 0.4 hotend in Bambu Lab's Basic PLA black. As the designer says above, this insert prioritizes space and filament economy over durability, so be careful taking things off the build plate, loading the box, etc. That said, it all worked great for me, though I don't have sleeves on my cards so I can't speak to that aspect. There did seem to be plenty of room to them? I have some of the promo player boards so there was substantial lid lift. To put that downward pressure less on the actual print I put four of the player boards above everything else rather than under some of the insert (as they normally would be) so the insert pieces could be fully within the box proper.
