LayerUp Stats 97 1

Add Jul 11, 26 Sync Sep 8, 26

In 5 Kanbans

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Harmonies Insert – Ultimate Organizer (v2.3)

for Harmonies (2024) Layer by Layer

Rune

Inserts Free

View on MakerWorld 531 1,273 Added May 19, 25 | Updated Sep 8, 26 Support Rune by Liking and Boosting their model.

Plan Your Print 5 makers

✓ Fits sleeved cards

✓ Stores vertically Stands on its side; contents stay put

About 342 g of filament From the designer's print profile

Print Profile (3) Harmonies Insert v2.3 – Color Layered (0.2mm | 2W | 10%) 10h 31m 434 g PLA

Harmonies Insert v2.3 – Color Layered (0.2mm | 2W | 10%)

3 plates 10h 31m 434 g PLA

X1 Carbon, P1S, H2S, H2D Pro, X2D, H2C, X1E, P1P, A1, X1, H2D, P2S, A2L

• 0.2 mm layer height (adaptive height for smooth quality) • 2 walls, 10% infill (default) • No supports needed • Printed and verified in single-color gray PLA - I'll update with new photos once I get the filament to print it in nice colors. • Adjusted for tighter fit with 1 manual in the box • If you already printed v1.0, only reprint the boxes —the board holder is unchanged • Ensure good bed adhesion for larger parts (use glue stick or your preferred method) • Files are merged for adaptive height optimization but can be split if needed Updates in 2.3 • Added plate with split cube boxes • Fixed color layers (2.2 was broken, sorry!)

Plate Details (3)

0.4 mm nozzle, all plates

Plate 1 · Tiles, cubes and cards

5h 53m 242 g PLA · 89 g PLA · 15 g PLA · 3 g PLA · 135 g

Plate 2 · Tiles board and player boards

2h 48m 129 g PLA · 57 g PLA · 28 g PLA · 18 g PLA · 26 g

Plate 3 · Split cubes holders

1h 50m 63 g PLA · 15 g PLA · 7 g PLA · 2 g PLA · 39 g

Harmonies Insert v1.0 – Color Layered (0.2mm | 2W | 10%)

2 plates 7h 25m 342 g PLA

X1 Carbon, X1E, A1, P2S, P1P, X1, H2D Pro, H2C, P1S, X2D, H2D, H2S, A2L

• 0.2 mm layer height (adaptive height recommended for improved surface detail) • 2 walls, 10% infill (default) • No supports needed • Colorized by layer: PLA Basic Blue → Cyan → Matte Caramel → Matte Desert • Designed to visually match the game’s theme—makes the box pop on opening • Ensure good bed adhesion for large parts (e.g., player board tray 204×204 mm) - use glue! • Files are merged to take advantage of adaptive height; can be split if needed

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · Tiles, cubes and cards

4h 37m 213 g PLA · 112 g PLA · 88 g PLA · 10 g PLA · 3 g

Plate 2 · Tiles board and player boards

2h 48m 129 g PLA · 26 g PLA · 57 g PLA · 28 g PLA · 18 g

A1 Mini, 0.2mm layer, 2 walls, 10% infill

6 plates 9h 22m 385 g PLA

A1 mini, P1S, H2S, H2D Pro, X2D, X1 Carbon, H2C, X1E, P1P, A1, X1, H2D, P2S, A2L

Made a profile for those with an A1 Mini, glue is required to assemble.

Plate Details (6)

0.4 mm nozzle, all plates

Plate 1

2h 45m 114 g PLA · 114 g

Plate 2

42m 23 g PLA · 23 g

Plate 3

1h 48m 77 g PLA · 77 g

Plate 4

1h 25m 60 g PLA · 60 g

Plate 5

1h 22m 56 g PLA · 56 g

Plate 6

1h 20m 55 g PLA · 55 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

I designed this insert because none of the existing options quite met my expectations. While the original insert is decent—better than most stock solutions—it falls short in a few areas: the card holder is too tight for sleeved tarot cards (I'm using Arcane Tinmen), and setup/teardown could be smoother. I wanted something more functional, visually cohesive, and tailored to how I store and play the game.

This custom insert includes:

A layered holder for the player and tiles boards , scanned from the originals for a snug fit.
A large tile and scorepad box , easy to dump onto the table and repack.
A card tray with proper clearance for sleeved cards.
A removable animal & spirit cube tray with sloped compartments for easy pickup—goes straight from the box to the table.

The insert makes full use of the box space. There's a tiny bit of wiggle room (about 1 mm), but it still holds everything securely—even in vertical storage. The cubes stay put, and everything remains in place, even with all three manuals stored in the box.

Colors are layered from dark blue → cyan → caramel → lemon yellow , matching the game’s visual tone and setting the mood the moment you open the box.

Note:

The player and tile board holder is quite large. I recommend ensuring good first-layer adhesion—use glue stick or your preferred method—to prevent corner lift and failed prints.
The individual plates are merged in the provided files to take advantage of adaptive layer height for quality optimization. You can of course split them up if you prefer to print them individually.

Bill of Materials (Bambu Lab PLA, bottom to top):

PLA Matte Dark Blue (base layer)
PLA Basic Cyan
PLA Matte Caramel
PLA Matte Lemon Yellow (top accents)

🛠️ Changelog

v2.3 (January 2026):

Restored color layers

v2.2 (January 2026):

Added plate with optional split cube trays

v2.1 (November 2025):

Fixed fillet error in tiles box

v2.0 (May 2025):

Increased height of box layer by 6mm for a perfect fit when storing one manual.
Tiles box now includes space for the score board.
Tiles box slimmed by 4mm, compensated by added height.
Card tray enlarged by 4mm in both directions to allow 2mm wall thickness.
Cube tray redesigned: 4mm shorter and wider, now with one long slope for better access.
All components in the box layer now align better visually.
No changes to the player board holder—reprint only the boxes to upgrade from v1.0.

v1.0 (May 2025):