Stonesaga Mantle "enhancer" overlay

It bothered me that the card did not slot in at the top of the Mantle. So I set out to fix this. I decided that there should be slots for energy and health tokens, so I added that in. NOTE that to affix the arms for the tokens, you will need to super glue them in place! (this means you'll need to print 1 of these enhancers for each Mantle. Also, there is certainly a very real risk of super glue getting on your mantle. I'm sorry about that! Use at your own risk, of course!)

Use care when gluing in the arms to make sure that their position on the mantle is correct. I do not have a good method for designing this way (I am still using Blender, god help me), so it's pretty dang janky. But in my copy I've had no problems and the arms are gripping the tokens very nicely :-) I hope you'll have similar results but yeah….. Get them glued in the right spot and allow it to cure before using.

The mantle fits into the “enhancer” (I do not know what to call this) snugly. For me this is a feature. If it is too snug, sorry about that. Definitely check after printing and resize if necessary.

The character card has a nice slotted tray and should fit in wonderfully (it does for me, anyway). I did not design items to specifically slot in at the sides. Cards CAN slot in there, a bit, but this is not fully realized as it should be. (anyone who wants to take up that task… please do haha)

Lastly, when extending the “enhancer” to the left edge somewhat, my geometry got a bit borked. There's an uneven surface you'll notice. It isn't bad enough for me to try to fix it, but wanted to note it. Again, please feel free to fix that if you know how and care enough haha :-)

Thank you, and enjoy!