LayerUp Stats 33

Add Jul 2, 26 Sync Sep 8, 26

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Twilight Struggle Deluxe Insert

for Twilight Struggle (2005) Layer by Layer

Rune

Inserts Free

View on MakerWorld 79 277 Added Feb 27, 25 | Updated Sep 6, 26 Support Rune by Liking and Boosting their model.

Plan Your Print

✓ Fits sleeved cards

✓ Stores vertically Stands on its side; contents stay put

✓ Optional multicolor profile The designer also offers a multicolor way to print this (an MMU/AMS profile or per-color parts)

About 448 g of filament From the designer's print profile

Print Profile (2) 0.2mm layer, 2 walls, 10% infill 10h 29m 448 g PLA

0.2mm layer, 2 walls, 10% infill

5 plates 10h 29m 448 g PLA

X1 Carbon, P1S, P1P, X1, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

• 0.2mm layer height (adaptive) for a balance of speed and quality; • Prints without supports; • Color managed via filament swaps in the layer order (Blue for USA, Red for USSR, White for cards & token supply, Grey for the rest); • Wall loops: 2, infill: 10% for optimal print efficiency.

Plate Details (5)

0.4 mm nozzle, all plates

Plate 1 · Cards and tiles organizer holder

2h 25m 128 g PLA · 122 g PLA · 6 g

Plate 2 · Player tokens - USA

2h 19m 101 g PLA · 8 g PLA · 93 g

Plate 3 · Player tokens - USSR

2h 19m 101 g PLA · 8 g PLA · 93 g

Plate 4 · Tiles organizer

1h 58m 71 g PLA · 71 g

Plate 5 · Spacer - for snug fit (acts as lid)

1h 27m 47 g PLA · 47 g

Twilight Struggle insert (Boardpia_Book Box Ver.)

5 plates 16h 26m 603 g PLA

P2S, H2C, X1E, X1 Carbon, P1S, H2D Pro, A1, H2S, X1, P1P, H2D, X2D, A2L

Plate Details (5)

0.4 mm nozzle, all plates

Plate 1 · Cards and tiles organizer holder

3h 23m 152 g PLA · 141 g PLA · 11 g

Plate 2 · Player tokens - USA

3h 1m 120 g PLA · 15 g PLA · 105 g

Plate 3 · Player tokens - USSR

3h 1m 121 g PLA · 16 g PLA · 105 g

Plate 4 · Tiles organizer

2h 9m 80 g PLA · 80 g

Plate 5 · Spacer - for snug fit (acts as lid)

4h 53m 130 g PLA · 130 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

I couldn’t find a Twilight Struggle insert that fit my needs, so I designed my own! Most inserts cause too much lid lift or don’t handle sleeved cards well , so I made one that:

✅ Fits the Twilight Struggle Deluxe Edition (tested with the Sixth Printing , but should work for other Deluxe versions).
✅ Optimized for sleeved cards —the Early War cards alone take up most of the free vertical space , so I structured the trays accordingly.
✅ Smart card & token storage:

Four card piles:
Early War (takes up most vertical space).
Late War (not full, so has room for token trays).
Two Mid-War piles (also with space for token trays).
Tile trays for easy sorting & quick setup.

✅ Trays for general supply tokens , that support deluxe plastic tokens (linked below), but should support cardboard as well .
✅ Lidless player component trays for fast access (influence counters 1-8 + die).

Includes a spacer to fill the small gap next to the player board , which helps fix everything in place and allows for vertical storage .

Size & Printing Details

Insert Dimensions: 300 × 220 mm
Multicolor Printing (Optional):
Top Layers Color Swaps:
Blue for USA trays
Red for USSR trays
White for cards & token supply
Rest printed in grey
If you don't have AMS , you can either:
Print it in one solid color
Manually swap filaments at the top layers
Print trays in Red/Blue/White separately
Adaptive Layer Height Used:
Most plates are printed with adaptive layer height to ensure a smooth and fast print .

🛠 Plastic tokens used: GeekUp Bit Set: Twilight Struggle

🔥 Prints without supports and keeps everything tightly organized!

Since I couldn’t find any Twilight Struggle inserts on MakerWorld , I figured others might need this too. Hope this helps fellow Twilight Struggle fans! 🎲🔥

twilight struggle