Organizer / Insert for Train – Ticket to Ride

for Ticket to Ride (2004) Layer by Layer

also fits Ticket to Ride: Europe (2005)

also fits Ticket to Ride: Nordic Countries (2007)

JJ_Golmon

Inserts Free

View on MakerWorld 574 1,338 Added Jul 27, 25 | Updated Aug 6, 26 Support JJ_Golmon by Liking and Boosting their model.

Plan Your Print

✓ No lid lift The box opens and closes without lifting the insert out

About 52 g of filament From the designer's print profile

Print Profile (2) 0.2mm layer, 2 walls, 10% infill 2h 22m 52 g PLA

0.2mm layer, 2 walls, 10% infill

1 plate 2h 22m 52 g PLA

A1, H2D, X1 Carbon, X1E, X1, P1S, P1P, A1 mini, H2D Pro, H2S, P2S, H2C, X2D, A2L

Train space size: 11,9x9,4 mm Je recommande vivement d’activer l’ ironing pour un rendu plus lisse selon vos paramètres. Pour ma part, j’imprime à : • Vitesse : 35 mm/s • Flow : 25% • Matériau : PLA Bambulab N’hésitez pas à ajuster selon votre imprimante et filament pour un résultat optimal !

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

2h 22m 52 g PLA · 52 g

Scaled, no holes variant, no AMS, 0.2mm, 2 walls, 10% infill

4 plates 3h 42m 81 g PLA

P1S, X1 Carbon, P2S, H2D Pro, X1, H2C, H2S, P1P, A1, A1 mini, X1E, H2D, X2D, A2L

After printing the original and excellent model, I saw that the holes were big enough to let the wagons escape from the box if you shook them, also, it was a tight fit in the box. So this profile made them a little bit smaller (98%), separated the pieces in multiple plates so it can be printed with multiple colors without an AMS, and provided two new variants for the cover, one exactly the same as the original but with the holes covered, and another one with a similar pattern, but no big holes at all. Trust me, Handy will tell you the fourth plate is solid. But it won't be! ;)

Plate Details (4)

0.4 mm nozzle, all plates

Plate 1 · Main Piece

1h 14m 31 g PLA · 31 g

Plate 2 · Cover with holes

53m 17 g PLA · 17 g

Plate 3 · Cover without holes

53m 18 g PLA · 18 g

Plate 4 · Alternative Cover

42m 15 g PLA · 15 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

Upgrade your Ticket to Ride box with this practical 3D insert!

An organizer designed for demanding players. Holds 45 train cars perfectly, fit inside all Ticket to Ride boxes .

🚂 Compatibility: All Ticket to Ride (Europe, Germany, USA – tested)
📦 Perfect fit: slides inside the original box without lifting the lid
🔒 Secure closure: snap-fit system – no rubber bands or glue needed
🧮 Easy counting: trains stored in rows of 5 to track them at a glance
⚡ Save time: faster setup and cleanup after every game

Feedback is welcome if you print it – it helps me improve 🙂

If you like this insert, don’t forget to leave 5 ⭐!
Boost Me Si ça vous a plu, boostez ! Ça motive plus qu’un café ☕🚀
Merci à tous ceux qui le feront :)

EDIT 28/07/2025

@user_777854949 identified a size issue with some versions, particularly the old Europe Edition . To address this, we implemented a patch by increasing the width by 4% .

Specifically, I modified the model dimensions, increasing the size from 11.5 mm to 11.9 mm . After testing on the old Europe Edition , this adjustment successfully resolved the problem. Sorry

EDIT 14/09/2025

Une nouvelle édition de Ticket to Ride USA est sortie (celle qui correspond à la photo juste en dessous). Je n'ai pas pu faire de test dessus, donc pour le moment elle n'est pas supportée.

ticket to ride aventuriers du rail train cars wagon organizer 3d print insert board game storage tabletop gaming 3d printed organizer board game component insert for board games