Kingdom Death: Monster - Organiser

Preface: This is a huge print job (for a game insert) that will take around 80 hours and 3.5kg of filament.

KD:M is a favourite in our household and so must have an organiser that does it justice. We've designed this to be robust, to protect the content, and help speed up the gameplay. We've kept in mind what is needed and when, so you can work with minimal items on the board at a time, and help keep everything organised for not only packdown, but gameplay as well.
Our previous organiser had large card trays with most of the cards in each, and required a lot of handling, we wanted individual boxed for the quarries and smaller boxes for other cards. This setup has room for 2 rulebooks and some extra storage space here and there.
Currently designed for 1.6 update content
Watch the video here: https://youtu.be/slMoCC7i2LI

Full item list-
20 x Individual labeled card boxes for the bad guys
7x Labeled card boxes for the rest of the standard sized cards, including a 'Stash' box for whatever you migh need.
2x Labeled card boxes for both Monster gear & Settlement gear cards.
1x 2 part caddy for terrain tiles, with a under shelf for storage
1x Terrain tray for Flower Knigh and Sunstalker dials (Update 1)
1x 2 part caddy with lid for all small tokens (including room for a pet rock, IYKYK) and settlement events.
1x Dice tray with lid for 2 sets of dice and monster dice
1x Save tray. This will hold seperate gear for 4 survivors, 2 slots for stashed gear, all player sheets, and player gear sheets.
1x 2 part caddy with lid for settlement phase, one shelf will hold known settlements and learnt innovations, with room for weapon proficiency cards you might want to keep aside. The other identical tray holds locked settlement locations and known innovations that haven't been learnt.
Lantern magnet for picking up boxes.

What you'll need:
-4 rolls of fillament (3.5kg with no reprints)
-A small amount of a second colour, maybe 150g
-69 magnets 10mm x 2mm round (with 2 lanterns)
-Some CA glue for the magnets
-Time & patience

A few Notes:

• We've used 10mm magnets becasue some of the card boxes are heavy and I wanted to ensure they would pick-up.

I used 10mm for everything else just to make it easier.
The tollerance on the magnet holes is tight, for a reason, we didn't want to rely on glue for the hold. If you don't have a magnet dispenser pen, we recommend printing one for this job.

• The lanterns are designed to hold 2 of the magnets. This was to increase the magnetic power. I'm no engineer, but it seemed to help.
• All card storage is designed for sleeved cards, but some of them are still snug, since the video was made, we've made some tollerance adjustments to add as much room on items as we could. The cards are sleeved with Paladin sleeves - Gawain, Palamedes, Morholt and Mordred. Please check those sleeve sizes before you purchase as the tolerances are quite tight to provide a secure fit for the sleeved cards.
• The settlement and hunt gear boxes still require card dividers.

The original ones wont fit.
So you have 2 options, cut the original ones a bit to fit (blasphemy, I know) which is what we did. Or, we've included a .PDF print file of all dividers you'll need.
If you do print them, get them on 300gsm minimum stock, with a matte finish.

• It does add weight, but we ar more focused on protection, gameplay, ease of setup and aesthetics. KD:M is a game that deserves to look good.
• The card boxes will feel a bit tight to start with, this is deliberate. They need to be tight to hold their weight under the magnet. If you open and close them a few times after print, they do get a bit softer, but still hold. We did lots of testing on these to make sure they hold up.